濟南彩鋼瓦在生產過程中要注意哪些？_新聞動態_新聞資訊-禹城泰瑞彩鋼復合板加工廠

熱點新聞

當前位置：首頁>新聞資訊>新聞動態濟南彩鋼瓦在生產過程中要注意哪些？

濟南彩鋼瓦在生產過程中要注意哪些？

來源：http://hxwjw.org.cn 日期：2020-04-27 發布人：

At present, our commonly used color steel brick is mainly used for making some industrial buildings and steel structure residential roofs, so its quality has strict requirements, or in the future, there may be water leakage, corrosion and a series of problems, shortening the service life, so Jinan color steel pays attention to these problems in the production process:

濟南彩鋼

　　彩鋼瓦生產廠家在生產彩鋼瓦時，大多都是采用彩鋼瓦機械設備來生產，提高了工作效率和產量，在使用的一些地方一定要注意工藝。
　　In the production of color steel tile, most of the manufacturers use color steel tile machinery and equipment to produce color steel tile, which improves work efficiency and output. In some places of use, we must pay attention to technology.
　　,彩鋼瓦設備使用前必須進行詳細的檢查,看看部分強,如果發現松螺母情況及時處理,也有機潤滑油也要檢查內容,將添加潤滑油是不夠的,這一次的時候,它可以為設備平穩運行奠定基礎。
　　First of all, the color steel tile equipment must be checked in detail before use to see if some parts are strong. If it is found that the nut is loose and treated in time, it is also necessary to check the content of organic lubricating oil. It is not enough to add lubricating oil. This time, it can lay a foundation for the smooth operation of the equipment.
　　其次，在放置安裝模具時，一定要切斷電源才能操作，安裝時也要做好防護，避免滑座墜落，造成人身傷害。
　　Secondly, when placing the installation mold, the power supply must be cut off before operation, and safety protection must be done during installation to avoid falling of the slide seat and personal injury.
　　生產結束后，必須及時清理彩鋼瓦設備板、建筑垃圾進行清潔，否則很容易導致生產的鐵銹板。
　　After the production, the color steel tile equipment board and construction waste must be cleaned in time, otherwise it is easy to lead to the production of rust plate.
　　清洗應在每次生產結束時進行，否則下次使用時可能會造成產品中的雜質，影響外觀，而且對產品的性能也會造成一定的影響。
　　Cleaning shall be carried out at the end of each production, otherwise impurities in the product may be caused, appearance may be affected, and performance of the product may be affected.

上一條：如何減少彩鋼板房鋼結構的變形?

下一條：工程板房防水等級劃分的依據和原則

18765446878