彩鋼板現在越來越普及，越來越多的建筑物采用彩鋼板制頂，可見彩鋼板的優勢之大，現在彩鋼板的施工不單單要求施工人員有相應的技術，而且也要配備設備來做安裝保障。但是，有時候我們會發現彩鋼板有傾斜現象，這到底是為什么呢？
Color steel plate is becoming more and more popular. More and more buildings use color steel plate to make roof. It can be seen that color steel plate has great advantages. The construction of color steel plate not only requires the construction personnel to have corresponding technology, but also needs to be equipped with equipment to ensure the installation. However, sometimes we can find that the color steel plate is inclined. Why is this?
1、照溫差：溫度變化會使彩鋼板產生較大的變形，尤其是夏季。在太陽光照射下，向陽面膨脹量較大，故鋼柱便向背向陽光的一面傾斜。
1. According to temperature difference: the temperature change will make the color steel plate produce bigger deformation, especially in summer. Under the sunlight, the amount of expansion towards the sun is large, so the steel column inclines to the side with the back to the sun.
2、纜風繩松緊不當：嚴禁利用攬風繩強行改變彩鋼板垂偏值。
2. Improper tightness of cable wind rope: it is strictly forbidden to change the vertical deviation value of color steel plate by using wind rope.
3、焊接變形：施焊后焊縫收縮變形對彩鋼板垂直度影響很大，由于本工程焊縫較厚，所以累計誤差的影響比較大。
3. Welding deformation: after welding, the weld shrinkage deformation has a great influence on the verticality of color steel plate. Due to the thick welding seam of the project, the cumulative error has a greater impact.
4、安裝誤差：由安裝過程中碰撞及彩鋼板本身幾何尺寸偏差引起，也包括校正過程中測量人員操作的誤差。
4. Installation error: it is caused by collision during installation and geometric dimension deviation of color steel plate itself. It also includes the error of measurement personnel during calibration.
以上就是我們給大家介紹的彩鋼板使用后發生傾斜的原因，我們在操作時要多加注意以上情況，盡量避免出現上述情況，如果大家想了解更多相關信息，歡迎給我們留言。
The above is the reason why the color steel plate inclines after use. We should pay more attention to the above situation during operation, and try to avoid the above situation. If you want to know more about it, please leave us a message.
