（1）表面平整度：板表面與尺寸定型一致的軋制型材組合平面結合處錯落不大于0.5mm,整體視覺平面感均勻。

(1) Surface flatness: The joint between the surface of the plate and the rolled profile combination plane with consistent size setting should not be more than 0.5mm staggered, and the overall visual flatness should be uniform.

（2）耐火極限：≥1小時。（已通過耐火監督檢驗中心檢驗）

(2) Fire resistance limit: ≥ 1 hour. (Verified by the National Fire Safety Supervision and Inspection Center)

（3）隔音性能：單面板≥28dB（A）。（已通過上海同濟大學檢驗中心檢驗）

(3) Sound insulation performance: Single panel ≥ 28dB (A). (Verified by the Testing Center of Tongji University in Shanghai)

（4）保溫性能：單面板導熱系數λ=0.2w/M℃；厚度60mm隔斷壁板傳熱系數

(4) Thermal insulation performance: thermal conductivity of single panel λ= 0.2w/M ℃; Heat transfer coefficient of 60mm thick partition wall panel

K=0.6Kcal/mm℃。

K=0.6Kcal/mm ℃.

（5） 強度高：雙層石膏夾巖棉彩鋼復合吊頂板殼承重1600N/㎡；撓度不大于3.5mm。

(5) High strength: The double-layer gypsum mixed with rock wool and color steel composite ceiling board shell can bear a weight of 1600N/㎡; The deflection shall not exceed 3.5mm.

（6）裝飾性強：彩鋼薄板采用寶鋼產品或進口產品，彩色均勻耐久，制作安裝過程中彩面貼有保護性塑料薄膜，彩面完整，無須修飾。

(6) Strong decoration: The color steel sheet is made of Baosteel products or imported products, with uniform and durable colors. During the production and installation process, the color surface is covered with protective plastic film, which is complete and does not require decoration.

（7）產品特點：

(7) Product features:

a.用熱鍍鋅鋼板為基板的彩色涂層板，其鋅層重量90/90（g/㎡）,具有防褪色、耐氣候、抗粉化、光澤性強等優點。

a. The color coated plate with hot-dip galvanized steel plate as the substrate has a zinc layer weight of 90/90 (g/㎡), which has advantages such as anti fading, weather resistance, anti powdering, and strong gloss.

b.用熱鍍鋁鋅鋼板為基板的抗靜電彩色涂層板，具有鍍55%Al-Zn鋼板的耐腐蝕性、優良的耐候性和防塵性，有助于保護室內環境的清潔，其防靜電阻抗為：1.0×105—1.0×109（Ω）

b. The anti-static color coated plate using hot-dip aluminum zinc steel plate as the substrate has the corrosion resistance, excellent weather resistance, and dust resistance of 55% Al Zn steel plate, which helps to protect the cleanliness of indoor environment. Its anti-static impedance is 1.0 × 105-1.0 × 109 (Ω)

（8）安裝工藝性好：彩色復合板可靈活拼裝組合，不需吊裝機械，可多次裝拆，重復使用。省材，省時。

(8) Good installation process: The colored composite board can be flexibly assembled and assembled without the need for lifting machinery, and can be assembled and disassembled multiple times for reuse. Save materials and time.

4、產品的技術要求

4. Technical requirements for the product

（1）彩鋼復合板均按程序文件規定批準的生產圖紙及相關技術文件進行制造。

(1) Color steel composite panels are manufactured according to the approved production drawings and relevant technical documents specified in the program documents.

（2）復合板粘結應牢固，粘結強度應大于芯板的抗拉強度。

(2) The bonding of composite panels should be firm, and the bonding strength should be greater than the tensile strength of the core panel.

（3）粘膠分布均勻。

(3) The adhesive is evenly distributed.

（4）復合板面應平整，無明顯劃痕，磕碰傷痕等缺陷。

(4) The surface of the composite board should be flat, without obvious scratches, scratches, and other defects.

5、產品檢驗規則

5. Product inspection rules

（1）產品需經（2）尺寸公差逐塊測量，不合格品應修正或剔除補足。

(1) The product needs to be measured block by block with (2) dimensional tolerances, and non-conforming products should be corrected or eliminated for supplementation.

（3）粘結質量檢驗，在生產條件相同情況下，每生產500板時從中任意切割一塊檢驗。

(3) Bonding quality inspection, under the same production conditions, cut any piece from every 500 square meters of board for inspection.

（4）用作承重彩色復合吊頂板，需作平整度檢驗抽樣數位百分之三，不合格產品剔除補足。

(4) For use as load-bearing color composite ceiling panels, a sampling number of 3% is required for flatness inspection. Unqualified products should be removed and supplemented.

（5）型式檢驗應從經出廠檢驗合格的產品中抽取，每次抽取三塊，當其中有一個項

(5) The type inspection should be taken from the products that have passed the factory inspection, with three pieces taken each time. When one of the items

目不合格時，加倍對該項目復檢，再不合格時，型式檢驗不合格。

When the item is found to be unqualified, double the re inspection of the item. If it fails again, the type inspection fails.

（6）外購、外協件入庫嚴格把好質量關，認真檢驗。

(6) Strictly control the quality of purchased and outsourced parts entering the warehouse and conduct thorough inspections.

本文由 禹城彩鋼復合板友情奉獻.更多有關的知識請點擊:http://hxwjw.org.cn真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待

This article is a friendly contribution from Yucheng Color Steel Composite Board. For more related knowledge, please click: http://hxwjw.org.cn Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned